7. The Main Menu
Transponder
Delete (RED button)
Edit (GREEN button)
New (YELLOW button)
Search (BLUE button)
Antenna setting
LNB type
LNB power
22 KHz
Toneburst
DiSEqC 1.0
DiSEqC 1.1
Motor
Note:
Usually you have to make no changes in the antenna settings. It is recommended
that only experienced users change settings.
Deletes the selected transponder. Confirm the
irrevocable deletion by clicking OK.
To change the frequency, the symbol rate and the
polarity of the selected transponder. Confirm with OK.
Add a new transponder. Enter the frequency, symbol
rate and polarity of the new transponder.
Confirm with OK.
Start the search with the selected transponder. Select
the search mode, the transmitter and the service type.
Confirm with OK.
Change the LNB type
Change the LNB power supply.
Set the 22 KHz on or off.
Select between No, Burst A and Burst B
Select between No, LNB 1 to LNB 4
Select between No, LNB 1 to LNB 16
Select between No, DiSEqC 1.2 or 1.3 (USALS)
ENGLISH
15