Stand Assembly - Megasat Royal Line Deluxe Serie Mode D'emploi

3. Stand assembly

1. For the assembly you need the following parts
Note:
Before installing the stand, please check that you have all of the parts and that there
is no visible damage. If a part is missing or appears damaged, please contact custo-
mer service.
2. How to mount the stand
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent
any damage to the TV.
Insert the stand as shown on
the TV.
04
Television
Note:
1. Before you put on the stand, please make
sure the direction is correct as shown below.
2. When you are putting on the stand, please
make sure the neck of the TV set is in the
correct position and attached tightly.
ENGLISH
4x Screws
Stand
rear
front (longer)