5. First installation
1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the
remote control (LED is GREEN).
3. After the TV is started, the First Instal-
lation menu appears. You can now
make the following settings:
• OSD language: Select a language for the OSD. To modify, use the
• Country:
• Home-state:
• OK button:
Tuning Setup
Reception mode:
Digital Typ:
Defaults for signal search
DVB-S (Satellit)
Satellit:
Astra 19.2° Ost
Search mode:
Standard
Channels type: Alle Kanäle
Service type:
Alles
Have you made all the settings, start the channel search with OK.
Select the country. To modify, use the
Select the display attribute of the TV:
Home-mode = dynamic and high-contrast colors
Store Mode = neutral colors
Starts „Auto Tuning" for Terrestrial, Cable or Satellite television.
Use the
keys to select the reception mode
t u
ATV (analogue) and/or DTV (digital)
Choose between Satellite, DVB-C or DVB-T
DVB-C (Cable)
Scan Typ:
Sorting by LNC: On
(LNC is an automatic channel
sorting)
ENGLISH
keys.
t u
DVB-T (Terrestrial)
Sorting by LNC: On
Full
(LNC is an automatic channel
sorting)
keys.
t u
09