Festo 14 Mode D'emploi page 15

1 User instructionsEnglish
The valve terminal type 14 is intended exclusively for con
trolling pneumatic actuators. When used together with
commercially available components, such as actuators, the
specified limits for pressures, temperatures, electrical
data, torques etc. must be observed. National and local
safety regulations must also be observed.
The valve terminal may only be fitted by trained personnel.
Warning
S Before carrying out installation and/or maintenance
work, switch off the power supply for the valve sole
noid coils and the compressed air supply.
Please note
Commission only valve terminals which is completely
fitted and electrically wired.
Caution
The components of the valve terminal contain electros
tatically sensitive components. The components will be
damaged if you touch the contact surfaces of the plug
connectors and if you do not observe the regulations
for handling electrostatically sensitive components.
Festo VDMA−02−ZR.. 0403a English 15