Abus NVR10010 Guide Rapide page 35

4
System time. Continue by clicking
„Next".Set the adapter speed tye
‚NIC type'manually. Default and
recommended setting is the
English
5
If you wish the address data to be au-
tomatically assigned, tick the "Enable
DHCP" checkbox. The addresses will
then be automatically assigned
by your router (where supported).If
proceeding in this way, move on to
point 13.
6
192.168.0.20 192.168.0.25
192.168.0.1
If your router does not automatically
assign the address data, enter the
data according to the following steps.
The image gives an example of
connected devices with the
corresponding IP addresses.
35