Accessories - FLUX VISCOFLUX mobile S Notice D'instructions Originale

3.5

Accessories

Discharge spout with support
Discharge spout with support and
Clamp connection (10-95907046)
Clamp blind cover DN 10 and 2''
When the conveying process is
interrupted, the drum can be closed
by means of two blind covers.
(10-00122355 und 10-00122356)
End position cut-off
(Part no. limit switch cpl. 10-00122447)
Only possible in connection with a con-
trol unit.
The limit switch switches off the motor
when an adjustable end position is
reached (e.g. drum is empty, motor
switches off).
From the factory, the limit switch cpl. is
mounted at pump length 1200 mm in
the upper position and at pump length
1000 mm in the lower position.
Change limit switch cpl. from the upper to the lower position (or vice versa):
Loosen and remove the hexagon screws (1), retighten the limit switch in the required
position.
Shift the limit switch (fine adjustment)
Operating instructions VISCOFLUX mobile S
1
Upper position Lower position
47 / 96