Weather Network Settings - Aercus WeatherSleuth Mode D'emploi

Note: If you incorrectly set the static IP settings and can no longer access the WeatherSleuth®, press
the reset button on the back of the module.

3.6.6 Weather Network Settings

Select the Weather Network tab to programme the Weather Network settings. Reference Figure 23:
1. Remote Server. The default setting is rtupdate.wunderground.com, which is recommended.
If you want to upload the weather data to your own website, select Customized from the pull
down menu
2. Server IP/Hostname. If Customized is selected as remote server, enter the host name or IP
address.
3. Server Port. Default is 80. Enter an integer between 1024~65535
4. Server type. Default is PSP. (JSP, PHP, ASP)
5. Station ID. See How to create a Wunderground.com account and station ID below.
6. Password. See How to create a Wunderground.com account and station ID below.
To confirm the changes, select Apply.
Aercus Instruments™ - WeatherSleuth®
Figure 22
23 | P a g e