Install Batteries - Aercus WeatherSleuth Mode D'emploi

Reference Figure 5. Turn the mounting pole collar to lock the pole into place by rotating clockwise.
Figure 5

3.3.3 Install Batteries

Reference Figure 6. Locate the battery door on the bottom of the sensor array. Turn the set screw
anti-clockwise to open the battery compartment. Insert 3xAA batteries (not included). The LED
indicator on the bottom of the sensor array will turn on for four seconds and normally flash once per
16 seconds (the transmission update period).
Close the battery door and tighten the screw.
Aercus Instruments™ - WeatherSleuth® 10 | P a g e