Appendix Troubleshooting - LG 19LE5300 Mode D'emploi

Masquer les pouces Voir aussi pour 19LE5300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

APPENDIX
APPENDIX
TROUBLESHOOTING
Abnormal Operation
The remote control
doesn't work
TV turns off suddenly
Video Problems
No picture &No sound
Picture appears slowly
after switching on
No or poor color or
poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks in pic-
tures
No picture when con-
necting HDMI
26
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product's power cord into the
outlet where the product's power cord was plugged in.
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Check for local interference such as an electrical appliance or power
tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Check antenna (Change the direction of the antenna).
If an HDMI cable doesn't support High Speed HDMI, it can cause flick-
ers or no screen display. In this case use the latest cables that support
High Speed HDMI.
*This feature is not available for all models.

Publicité

Chapitres

Table des Matières
loading

Table des Matières