GYS MSW 82000 Manuel D'utilisation page 8

Translation of the original instructions
Maintenance:
• Service should be performed by a qualified person.
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a so ft, dry cloth.
Regulations :
• The device complies with European Directive.
• The certificate of compliance is available on our website."
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The Bri-
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
Disposal:
• This product should be disposed of at an appropriate
DESCRIPTION
The MSW 82000 inverter is a product that converts DC electricity to AC electricity to provide the power needed to
operate small electrical equipment and digital products. It is widely used in cars, boats, mobile offices, post and tele-
communications, public safety, emergencies, and so on.
This inverter has adopted the internal electronics of this Power Inverter follow the pilot circuit international standard
with the benefits of being small, light, stable and with a high conversion efficiency. It includes five functions: low input
voltage protection, input overvoltage protection, overload protection, overtemperature protection, output short-circuit.
These five functions protect the vehicle's power supply, the equipment and the vehicle's circuit.
PRODUCT INTERFACE
1
2
1 DC current input -Terminal "-" (Black)
2 Fan
3
DC current input - Terminal «+» (red)
4 Power indicator (green)
8
cleaning agents be used.
tish Declaration of Conformity is available on our website
(see home page).
our website (see cover page).
recycling facility. Do not dispose of in domestic waste.
2
3
MSW 82000
6
5
6
7
8
5
4
7
Fault indicator (Red)
AC output sockets
ON / OFF switch
USB output
EN
8