GYS MSW 82000 Manuel D'utilisation page 10

Translation of the original instructions
7. Other questions
a. It is a modified sinusoidal inverter; to measure the voltage, use specific equipment. (RMS)
b. If power is supplied to an audio system, radio or television, interference may occur, which is normal.
c. In order to protect the vehicle's battery, stop using the inverter when the engine is turned off.
d. Do not dismantle the inverter. For any maintenance or repair, please contact a professional.
SECURITY MATTERS
1. Do not operate the inverter with wet hands. Keep the product away from children.
2. The temperature of the casing will be high after a long working period. Let it cool for a few minutes before
touching the product.
3. Do not put metal in the inverter as this may cause an electric shock..
4. Do not touch the plug metal when plugging it into the inverter socket.
5. Keep the inverter away from explosives.
6. Keep all AC electricity away from the inverter, as this could damage it and also cause electric shock.
ALERT LIST
Function
Low Input vol- Green:on
tage alarm
Low voltage Green:on
shutdown
Input overvol-
Green:on
tage protection
Overload pro- Green:on
tection
Overheating Green:on
shutdown
Output Green:on
short-circuit
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
10
State description
LED
Alarm
light output
Yes
Red: off
Yes
Red: on
No
Red: on
No
Red: on
Yes
Red: on
No
Red: on
MSW 82000
Restart the working method
AC
When the battery voltage returns to the corresponding range,
Yes
the alarm stops automatically..
When the battery voltage returns to the corresponding range, turn
the inverter off for 3 to 5 seconds, then turn it on to restart: green
No
light on, red light off.
24V battery restart tension : DC 23.4 V - 24.6 V
When the battery voltage returns to the corresponding range,
No turn the inverter off for 3 to 5 seconds, then turn it on to restart:
green light on, red light off.
Reduce the load to the corresponding range, turn the inverter
No off for 3 to 5 seconds, then turn it on to restart: green light on,
red light off.
When the inside temperature returns to the corresponding
No range, turn the inverter off for 3 to 5 seconds, then turn it on to
restart: green light on, red light off.
When the short-circuit is rectified, the inverter restarts automa-
No
tically.
EN