Drain Connection - Laundrylux CROSSOVER Serie Manuel D'installation

Drain connection

Connect the machine's drain hose to the back of the washer, using the spring clamp
provided in the accessories package. Avoid sharp bends in the hose which may
prevent proper draining.
You can connect the drain hose to a sewer stand pipe. If you do this, make sure
Fig.
1 that the outlet hose will not come out of the stand pipe.
You can connect the drain outlet to a sink or basin. If you do this, make sure the
outlet hose will not come out of the sink or basin.
1 1
C
Installation
A. 94 inches(239centimeters) maximum
B. 30 inches(76 centimeters) minimum
D
C. Machine
D. Drain outlet hose
A
B
4:1