Thermador Professional PRO-HARMONY DP304 Mode D'emploi page 10

ELECTRICAL SUPPLY, DUAL FUEL RANGES
Installation of the Dual Fuel range must be planned so that rough-in of junction box for the receptacle or conduit
connection will allow maximum clearance to the rear of the unit.
When the power supply cord or conduit is connected to the mating receptacle or junction box cover, the
combined plug/receptacle or junction box cover/conduit connector should protrude no more than 1 3/4" from
the rear wall. See Figure 3B.
Refer to Figure 8 on page 15 for location of junction box on unit. To minimize binding when the unit is connected
to the receptacle or junction box, orient the receptacle or conduit connector, and slide back into position
Note: Canadian models (numbers ending in "CC") have power cord supplied with range..
FIG. 3B Wall Connection
Power Cord & Receptacle
Step 2: Cabinet Preparation
1 3/4"
1 3/4"
Junction Box & Conduit
Note:
When using a 240VAC receptacle
having its own housing, it will be
necessary
receptacle's housing into the rear
wall. Mount the receptacle securely
to a wall stud, then seal around the
receptacle's housing. Follow all
local electrical codes.
8
to recess the