Table des Matières

Publicité

1
w
q
2
e
w
3
e
q

Cover Stitch

This stitch is sewn with two needles and forms two
parallel rows of the straight stitch on the right side, widely
used on cuffs and stretch welts of T-shirts etc.
There are three types of cover stitch:
• Narrow-left (3 mm wide)
• Narrow-right (3 mm wide)
• Wide (6 mm wide).
z Narrow-left (3 mm wide)
Remove the right needle (see page 14). Thread the
looper, left and center needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
q Left needle
w Center needle
x Narrow-right (3 mm wide)
Remove the left needle (see page 14). Thread the
looper, right and center needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
w Center needle
e Right needle
c Wide (6 mm wide)
Remove the center needle (see page 14). Thread the
looper, right and left needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
q Left needle
e Right needle
30

Publicité

Table des Matières
loading

Table des Matières