Zephyr Titan AK7636BS Guide D'utilisation, D'entretien Et D'installation page 22

Features & Controls
Electronic LCD Controls
Clean Air
Clean Air is a feature that turns the fan on every 4 hours for 10 minutes to remove stagnant air in the
kitchen.
To enable Clean Air Function:
With hood o , hold the Fan - button and Fan + button simultaneously for three seconds. The words
"CleanAir Function Activated" will illuminate and the fan will turn on speed 1 for 10 minutes. After 10
minutes the fan will turn o and the 4 hour timer will begin.
To disable Clean Air Function:
With hood o , hold the Fan - button and Fan + button simultaneously for three seconds. The words
"CleanAIr Function Deactivated" will illuminate indicating the function has been disabled.
When the Clean Air Function is enabled the fan will turn on speed 1 for 10 minutes every 4 hours of non
fan usage. After 10 minutes the fan will turn o and the 4 hour timer will reset.
If the user changes the fan speed while the Clean Air Function is in use, the Clean Air Function will stop.
If the user presses the On/O button at any time the 4 hour Clean Air timer will reset.
Optional Remote Control Pairing
To create a unique link between your hood and optional remote control please follow these steps.
With Hood o , press and hold the Lights button until the Display shows the words "Remote Pairing..."
then press any button on the remote, the Display will then show the words "Remote Paired" indicating
the remote control pairing is complete.
22 Titan Use, Care, and Installation Guide
P R O
T I TA N
WA L L