Zephyr Titan AK7636BS Guide D'utilisation, D'entretien Et D'installation page 16

Installation Instructions
Horizontal Ducting Conversion
16
4. Remove (4) screws attaching
blower to blower plate. Turn
blower 180 degrees and reattach
to blower plate.
5. Position single blower with single
blower plate as shown. Be sure to
tuck back of single blower plate
into tabs at back of hood. Secure
single blower plate to back of
hood using (4) screws removed
from step 2.
6. Attach 8" round duct collar to
back of hood body using (4)
M4x8 screws.
Titan Use, Care, and Installation Guide
P R O
T I TA N
WA L L