note: Be careful not to scratch
or damage the inside of the
battery cover as this is the nfC
antenna.
•
to switch nfC on or off: From
the Home screen, touch and
slide the notification drawer
down with your finger, then
select the NFC icon to turn it on.
note: when the airplane mode
is activated, nfC application
can be used.
•
using nfC: To use NFC, make
sure your device is switched on
and activate the NFC setting, if
disabled.
•
android Beam – You can beam
a web page, a video, or other
content from your screen to
another device by bringing the
devices together (typically back
to back).
note: make sure both devices
are unlocked, support near
field Communication (nfC),
and have both nfC and android
Beam™ turned on.
•
vpn – Displays the list of Virtual
Private Networks (VPNs) that
you've previously configured.
Allows you to add different
types of VPN. Refer to page VPN
connections chapter in details.
note: you must set a lock
screen pin or password before
you can use credential storage.
•
mobile networks – Set options
for data roaming, network mode
& operators, access point names
(APNs) and so on.
•
data enabled: Set to enable
data access over mobile
network.
•
data roaming: Set the device
to connect another network
when you are roaming or your
home network is not available.
•
network mode: Select a
network type.
•
access point names: Set up
83