Advance; Record - Avtech Push Video AVN801 Serie Manuel Utilisateur

3.3.5 Advance

Adjust the camera parameters if necessary.
 AVN801
Item
Shutter Speed*
Back Light**
Mirror
Flip
De-noise*
White Balance*
Sharpness
* AVN801 Only ** AVN701 Only

3.4 Record

3.4.1 Record
In "Record Configuration", you can:
 Enable or disable the alarm record function. When "Enable" is set to "No", the alarm record function is
disabled even if you enable it in other configuration pages.
 Select if the data should be overwritten when the memory storage is full.
 Enable or disable the audio record function.
 Select the video resolution for event recording.
Note: The higher resolution you choose, the more accuracy and higher image quality the recording will
be, but the faster the memory storage is consumed and become full.
 AVN801
Description
Set the shutter speed based on your need.
The options are: Up to 1/10 sec, Up to 1/30, Up to 1/15, Up to1/6, Up to 1 and Up to 2.
It is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light.
The image will be properly exposed for clearness. Select to activate (ON) or disable (OFF) this function.
Note: This function is available only in the day mode.
Select "ON" to rotate the images horizontally based on your installation situation when necessary.
Select "ON" to rotate the image 180° when necessary.
Click and drag the slider to adjust the level from 0 ~ 10 to decrease the noise shown in the dark environment.
Process the current image to retain color balance over a color temperature range.
The options are: Auto, Incandescent Light, Cool Light, sun Light, Cloudy & Sun Shade.
Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the edges in the pictures.
Hold and drag the slider to adjust the level of sharpness from 0 ~ 100. The higher the value, the sharper the image.
 AVN701
 AVN701
13