Camera - Avtech Push Video AVN801 Serie Manuel Utilisateur

Check "Enable" to allow the network camera to be detected among devices within the same network area, and
set the identification name of the camera in "Friendly name".
When this function is activated, the other PC within the same domain as this camera will be able to search this
camera in:

"Network Neighbor" with the identification name set in "Friendly name" for Windows-based PC, or

" " (finder) or "Bookmark" with the identification name set in "Device Name" for Mac-based PC.
Double-click it to quickly open the web browser for camera access.
Port Mapping (Available only in UPnP)
This function can eliminate the need to additionally access the router for port forwarding.
For details, please refer to "Advanced Network Setup" from www.surveillance-download.com/user/n801.swf.
Note: Before using this function, make sure your router supports UPnP, and this function is enabled. If
not, please access your router additionally for port forwarding.
When "Port Mapping" is set to "Enable", the system will automatically assign an IP address or port number for
you if no IP address or port number is entered.
Note: When the configurations are saved successfully, you'll see a message indicating the IP address
and port number assigned to this network camera.

3.3 Camera

3.3.1 Camera
In this menu, you can set the camera title, and specify where to display this title on the display.
11