Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Product overview
The Fracarro FRPRO EVO HD is an high selective programmable compact headend for filter, amplify and
convert the VHF/UHF Digital Terrestrial channels as well as mix the FM signal. The FRPRO EVO HD is a
complete"Fully Agile Digital Channel Processor" that can be used on small, medium or high installation plants as
well as in hospitality enviroments.
•
Can process and convert more than 50 indipendent RF channels with very high selectivity on adjacent
channel
•
AGC automatic control circuit on all individual VHF/UHF input multiplexes
•
Isofrequency or "Fully Agile" frequency conversion for every filters and from any input even from VHF to
UHF frequencies.
•
Security code available for avoid incidental settings
•
5 indipendents inputs: FM / 4 x VHF-UHF with selectable 12-24 V remote power on all VHF-UHF input
Quick Mounting Instructions
•
Connect the device to the grounding electrode of the antenna system and fix the FRPRO EVO HD in
vertical position for guarantee the correct ventilation and heat dissipation;
•
Connect the power cord to the power supply socket. Check the status LED for DC power presence;
•
Connect the VHF/UHF and/or FM aerial's coaxial cables to the FRPRO EVO HD;
•
Connect the RF output coaxial cable to the RF coaxial distribution network;
•
If necessary, connect a field meter to the -30dB test port to check the quality signal
•
Configure the device using the three settings buttons available on the top of the FRPRO EVO HD (NOTE:
press the "confirm button" for two seconds to to access the main menù and use the left-down or right-up
arrows to scroll the sub-menù. Refer to the Quick Settings Guide chapter).
•
Optionally: insert an SD card in the SD slot to upload/download the configurations from/to another FRPRO
EVO HD;
NOTE. If necessary, the power adapter can easily be replaced without unmount the product by open the top left
plastic cover. Please refer to the Safety and Installation Warning chapter before proceed.
FRPRO EVO HD
Quick start guide
Publicité
Table des Matières
Manuels Connexes pour Fracarro FRPRO EVO HD
Sommaire des Matières pour Fracarro FRPRO EVO HD
- Page 1 The Fracarro FRPRO EVO HD is an high selective programmable compact headend for filter, amplify and convert the VHF/UHF Digital Terrestrial channels as well as mix the FM signal. The FRPRO EVO HD is a complete“Fully Agile Digital Channel Processor” that can be used on small, medium or high installation plants as well as in hospitality enviroments.
-
Page 2: Block Diagram
• Power up the FRPRO EVO HD by using the 220V power cord included in the package. The FRPRO EVO HD will need approximately 5 secs to initialize itself. The FRPRO EVO HD configuration can be performed by using the three settings buttons and the display available on the top front (see block diagram above). -
Page 3: Technical Information
• By selecting “OUTPUT”, is possible to define the total RF output level from 93dBuV to 113dBuV maximum output depending from the total amount multiplexes managed from the FRPRO EVO HD. • By selecting “SLOPE”, is possible to set a -9dB slope between the VHF and latest UHF frequencies managed from the FRPRO EVO HD. - Page 4 SAFETY WARNINGS The product must only be installed by qualified persons, according to the local safety standards and regulations. Fracarro Radioindustrie is free from all civil and criminal responsibilities due to breaches of the current legislation derived from the improper use of the product by the installer, user or third parties. The product must be used in full compliance with the instructions given in this manual in order to protect the operator against all possible injuries and the product from being damaged.
-
Page 5: Guida Rapida
VHF/UHF e miscelarli in uscita anche con il segnale FM. La centrale FRPRO EVO HD è un processore “Flessibile” di canali Digitali Terrestri e può essere utilizzata per gestire i segnali in impianti piccoli, medi o anche in grandi installazioni come quelle Hospitality. - Page 6 Rilasciare il pulsante “conferma” fino a quando viene visualizzato “RESET FINISHED” sul display. • Selezionare il paese (COUNTRY) dove la centrale FRPRO EVO HD è installata e salvare con il pulsnte “conferma”.Europa è l’impostazione predefinita. Per ulteriori informazioni è possibile consultare il manuale completo scaricabile dalla relativa pagina di prodotto disponibile sul sito www.fracarro.it...
-
Page 7: Impostazioni Di Uscita
24V disponibile soltanto per gli ingressi VHF/UHF), per fare l’upgrade del fimrware o per gestire la memoria esterna nello slot SD card utilizzare il menù “UPGRADE” (formattazione, upload/donwload configurazione). Selezionare il menù “EXIT” per bloccare/sbloccare la centrale FRPRO EVO HD e per decidere il “LOCK CODE”. - Page 8 In caso di guasto non tentate di riparare il prodotto altrimenti la garanzia non sarà più valida. Utilizzare esclusivamente l’alimentatore fornito in dotazione con il prodotto. Le informazioni riportate in questo manuale sono state compilate con cura, tuttavia Fracarro Radioindustrie S.r.l. si riserva il diritto di apportare in ogni momento e senza preavviso, miglioramenti e/o modifiche ai prodotti descritti nel presente manuale.
- Page 9 Guide Rapide Introduction La station Fracarro FRPRO EVO HD è une centrale compacte programmable à haute sélectivité en mesure de filtrer, amplifier et convertir le canaux numériques dans la bande VHF/UHF et de les coupler en sortie avec le signal. La station FRPRO EVO HD est un processeur flexible de canaux numériques terrestres et peut être utlisée pour réaliser des installations de distribution de moyennes et grandes dimansions.
- Page 10 Sélectionnez maintenat sous COUNTRY le pays EUROPE pour la France et validez avec la touche “confirmation – V”. • Le démarrage de la station FRPRO EVO HD prend 5 secondes environs. Tout le paramétrage peut être réalise par les 3 touches en façade et l’afficheur. •...
-
Page 11: Caractéristiques Techniques
“EXIT” pour verrouiller/déverrouiller la station FRPRO EVO HD et pour choisir le code PIN “LOCK CODE”. Caractéristiques techniques La notice complète de la station FRPRO EVO HD est disponible dans la section produits du site www.fracarro.fr FRPRO EVO HD Code Fracarro 287434 Entrée... - Page 12 Seulement du personnel formé et autorisé peut intervenir pour la maintenance du produit. En cas de panne n’essayez pas de le réparer car la garantie sera invalidée. Utilisez exclusivement l’alimentation fournie avec le produit. CONFORMITE AUX DIRECTIVES EUROPEENNES Fracarro déclare que le produit est conforme aux directives 2014/30/UE, 2014/35/UE e 2011/65/UE. Le texte complet de la déclaration de conformité UE è disponible à l’adresse suivante ce.fracarro.com INFORMATION POUR LES UTILISATEURS Le symbole de la poubelle barrée présent sur le produit indique que le déchet doit être collecté...