F.Bertazzoni REF24BMFXNV Mode D'emploi page 11

15) Move the upper door to the appropriate position,
and then secure part using the screws
securing part , pass the connector
hinge (see step 3). (Please hold the upper door with
your hand when installing)
16) Connect the electrical connector
the picture, then secure part
(see step 2).
MODEL WITH DISPLAY
Electrical connector
Upper hinge cover
Self-tapping screws
. Before
through the
MODEL WITHOUT DISPLAY
Special flange screws
Upper hinge
MODEL WITH DISPLAY
Special flange screws
Upper hinge
Electrical connector
as shown in
using the screw
17) Open the upper door, mount the door racks, and
then close it.
Note:
If your appliance has handles, you will have to
reverse the handles following the instructions
below. Remove the upper door and place it on a
smooth surface with its panel facing upwards.
Lift or pry up part
the screws , as shown in the picture. Move
the handle to the right side, then install the
screws , part
and part , then remove
and part , in that order.
Handle covers
Special screws
Handle
Screw hole cover
11
EN