Table des Matières
Publicité
®
R&S
RT-ZC20B
2
Product Description
2.1
Product Overview
The R&S RT-ZC20B is an AC/DC current probe. It allows the user to make cur-
rent measurements from DC to 100 MHz. By clamping on the conductor to be
measured, the current waveform is captured easily without interrupting the elec-
tric circuit.
Since the probe is equipped with the Rohde & Schwarz probe interface, it can be
connected to any Rohde & Schwarz base unit that is compatible with this inter-
face. When connected to the front panel of a Rohde & Schwarz oscilloscope, the
probe is controlled using the software of the oscilloscope.
2.2
Key Features
● Highly accurate current detection.
● Easy current measurement without interrupting the electric circuit.
● Broadband frequency characteristics DC to 100 MHz.
● Permits measurement of low current levels.
● Easy protection function to avoid self-heating during excessive input.
● Unique thin film Hall effect element.
● Rohde & Schwarz probe interface:
– Powered by the oscilloscope - no need for an additional power supply
– Remotely controlled by the oscilloscope
2.3
Inspecting the Contents
● Inspect the package for damage.
Keep a damaged package and the cushioning material until the contents have
been checked for completeness and the instrument has been tested.
User Manual 1409.8285.02 ─ 02
Product Description
Product Overview
9
Publicité
Table des Matières
