Orla STAGE PLAYER Notice D'utilisation page 8

It is now possible to balance the two sounds using the (/\) and (\/) DATA buttons .
The value 4 is related to the Piano sound and the value 1 to the String sound. Using the (/\) and (\/)
DATA buttons it is possible to balance the two sounds. Try the different volume settings as per
below table:
4 - 1
BASS TO LEFT
When the BASS TO LEFT button is pressed the instrument automatically splits the keyboard in two
parts and a BASS sound is automatically selected.
Please note that when the BASS TO LEFT button is selected, if there are two sounds selected in the
VOICE section, the second sound will be automatically switched off.
If necessary it is possible to change the Split Point:
- Press the BASS TO LEFT button and hold it for a few seconds
- Hold the button until the display shows:
- The number 48 is related to the active Split Point (C3).
- To change the Split Point use the (/\) and (\/) DATA buttons to set a different value.
- A few moments after the Split Point is set the display will go back to the Tempo value.
DIGITAL REVERB
The DIGITAL REVERB effects expand the sounds of your instrument giving your music a new
dimension. The instrument has three different Reverb Type:
4 - 1
4 – 2 4 - 3
48
1 – Room
4 – 4 3 - 4
2 – Hall 3 – Theatre.
8
2 - 4 1 - 4