Description
j
j
Four-digit LED display
Button - power on/off
Button - Increase rpm
Button - Decrease rpm
General Operating Instructions
The stirrer must be securely mounted as specified in the installation instructions.
Ensure the mixing shaft and blade are securely attached. The stirrer is now ready
for use to mix liquids.
Button Operation Functions
Power Button - Turns the stirrer motor on and off. When initially
turned on, stirrer will spin at 50 rpm.
Increase Button - Increases the speed.
Decrease Button - Decreases the speed.
OL Indicates an overload condition. The load is too great for the stirrer and must
be reduced. The display will flash "OL" five times and the unit will turn off. To reset
stirrer turn power back on.
Collet
Housing
Clamp opening
Clamp knob
4