Delete Files; Auto Power Off - Num'axes PIE1059 Guide D'utilisation

5.5.

Delete files

− Slide the switch to the SET position.
− Press OK to enter the playback function, then press , ,  or  to browse the recorded
photo/video files.
− Press OK to see the selected photo/video.
− Press the MENU button, select "Delete one" (delete the selected photo/video) or "Delete all" (delete
all photos/videos) then press OK.
− Press MENU to exit.
5.6. Protecting files
This function can be used to protect some of the recorded files from accidental deletion.
− Slide the switch to the SET position.
− Press OK to enter the playback function, then press , ,  or  to browse the recorded
photo/video files.
− Press OK to see the selected photo/video.
− Press the MENU button, select "Protect files" then press OK.
− Select "Lock one" (protect the selected photo/video), "Lock all" (protect all photos/videos), "Unlock
one" (unprotect the selected photo/video) or "Unlock all" (unprotect all photos/videos) then press
OK.
− Press MENU to exit.
5.7.

Auto power off

In SET mode, the camera will automatically power off if you don't press the keypad for more than
3 minutes. If you want to do some further configuration, slide the switch to OFF then back to SET and press
the MENU button.
5.8. Transfer the photos/videos to a computer
To upload your photos/videos to a computer, slide the switch in the ON position.
Connect the supplied USB cable to the camera's USB port and then directly to a main USB port on your
computer.
"MSDC" will appear on the LCD screen and your computer will recognize the device as "removable storage".
In the removable storage, you will find the photo/video files in "DCIM/100MYCAM" and you will be able to
copy them to your computer.
WARNING: Do not disconnect the USB cable or remove the memory card while copying photos/videos. You
could lose files.
5.9. Customizing the operating settings
Slide the switch to the SET position (the LCD screen will light up) then press the MENU button once to enter
the camera setting menu.
You can navigate the setting interface by pressing , ,  or . Press OK for selection, press MENU to
exit to the previous page, and press MENU to switch alpha/digits/symbols.
PIE1059 - Indice B – Octobre 2021 17/56