English; Setting The Speed - Braun Multiquick MR 6550 M FP-HC-K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

English

Our products are engineered to meet the
highest standards of quality, functionality and
design. We hope you thoroughly enjoy your
new Braun appliance.
Caution
Please read the use instructions carefully
and completely before using the appliance.
The blades and the tools (22a-c) are
very sharp! To avoid injuries, please
handle blades with utmost care.
• Keep the appliance out of reach of children.
• This appliance is not intended for use by
children or persons with reduced physical or
mental capabilities, unless they are given
supervision by a person responsible for their
safety.
• The appliance is constructed to process
normal household quantities.
• Always unplug the appliance when it is left
unattended and before assembling, disas-
sembling, cleaning or storing.
• Before operating, check whether your
voltage corresponds to the voltage printed
on the bottom of the appliance.
• Especially when operating the handblender
attachment in hot liquids, do not immerse
the blender shaft into – or remove it from the
liquid while the appliance is switched on.
• Do not hold the motor part (1) or the whisk
gearbox (7) under running water, nor
immerse them in water.
• The beaker (9) is not microwave-proof.
• Before operating the food preparation
attachment (15), make sure that the lid
interlock (17c) is properly clicked in and that
the pusher (16) is in place.
• Do not insert other tools than the pusher
(16) into the filling tube during processing.
• Always switch off the appliance before
removing the lid (17).
• The lid (17) can be cleaned under running
water, but do not immerse it in water, nor
clean it in a dishwasher.
• The bowl (18) is not microwave-proof.
• Braun electric appliances meet applicable
safety standards. Repairs or the replace-
ment of the mains cord must only be done
by authorised service personnel. Faulty,
unqualified repair work may cause consider-
able hazards to the user.
Description
1 Motor part
2 Variable speed regulator
3 On/off switch for variable speed
4 Turbo switch
5 Release buttons
6 Blender shaft
7 Whisk gearbox
8 Whisk
9 Measuring beaker
10 Chopper attachment
11 Upper part
12 Blade
13 Chopper bowl
14 Anti-slip base/lid
15 Food preparation attachment (FP)
16 Pusher
17 Lid
17a Coupling for motor part
17b Filling tube
17c Lid interlock
18 Bowl
19 Anti-slip base (also serves as a lid)
20 Blade
21 Kneading tool
22 Tool holder
22a Slicing tool
22b Shredding tool (coarse)
22c Shredding tool (fine)

Setting the speed

When activating switch (3) the processing
speed corresponds to the setting of the
variable speed regulator (2). The higher
the speed setting, the faster and finer the
chopping results will be. For maximum
processing speed, press the turbo switch (4).
You may also use the turbo switch for instant
powerful pulses without having to manipulate
the speed regulator. Depending on your
application, we recommend the following
speed settings:
Handblender
Whisk
Chopper attachment see speed tables in
Food preparation
attachment
A How to operate your
handblender
The handblender is perfectly suited for
preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing drinks
and milkshakes.
a) Insert the motor part (1) into the blender
shaft (6) until it locks.
b) Introduce the handblender vertically into
the vessel, then press switch (3) or turbo
switch (4).
c) To release the blender shaft after use,
press buttons (5) and pull it off.
You can operate the handblender in the
measuring beaker (9) and just as well in any
other vessel. When blending directly in the
saucepan while cooking, take the pan from
the stove first to protect the appliance from
overheating.
Recipe example: Mayonnaise
200 – 250 ml oil,
1 egg (yolk and white),
1 tbsp. lemon juice or vinegar,
salt and pepper to taste
Put all ingredients into the beaker according
to the a.m. order. Introduce the handblender
to the base of the beaker. Pressing the turbo
switch (4) keep the handblender in this
position until the oil emulsifies. Then, without
switching off, slowly move it up and down
until the mayonnaise is well combined.
B How to operate your whisk
Use the whisk (7) only for whipping cream,
beating egg whites and mixing sponges and
ready-mix desserts:
a) Insert the whisk (8) into the whisk gearbox
(7) then insert the motor part (1) into the
gearbox until it locks.
b) Place the whisk in a vessel and only then,
press switch (3)‚ to operate it.
c) To release, press buttons (5) and pull off
the gearbox. Then pull the whisk out of the
gearbox.
For best results ...
• use a wide bowl rather than the beaker,
• move the whisk clockwise, holding it slightly
inclined.
1 ... turbo
3 ... 15
picture section
see speed tables in
$
picture sections
%
,
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Minipimer mr 6550 m fp-hc-k4191Multiquick 5 mr 570 patisserie

Table des Matières