Setting The Super Spool; Hoses And Fittings - Greenlee H4802 Serie Manuel D'instructions

Setting the Super Spool™

H4802-3 and H4802-5 Only
The Super Spool allows the tool to be used with either
open-center or closed-center hydraulic systems.
1. Insert a screwdriver into the spool recess.
2. If using:
• Open-center hydraulic system, turn the
Super Spool counterclockwise until it stops.
• Closed-center hydraulic system, turn the
Super Spool clockwise until it stops.
OC
Greenlee Tools, Inc.
CC
H4802 Series Pole Tampers

Hoses and Fittings

Installation and Maintenance
Refer to publication 99930323, SAE J1273
(Hose and Hose Assemblies).
Replacement
Refer to a Greenlee catalog or publication 99910322,
Low Pressure Quick Couplers, Adapters and Hoses.
Do not disconnect tool, hoses, or fittings while
the tool is running or if the hydraulic fluid is
hot. Hot hydraulic fluid can cause serious burns.
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070