Opening And Switching Applications - LG G2 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important notice
NOTE: If you have not logged into your Google Account and have forgotten
your Unlock Pattern, you will need to enter your Backup PIN.
5. Using the Hard Reset (Factory Reset)
If your phone does not restore to its original condition, use a Hard Reset (Factory Reset)
to initialize it.
1
Turn the power off.
2
Press and hold the Power/Lock key + Volume Down key on the back of the
phone.
3
Release the Power/Lock Key only when the LG logo is displayed, then immediately
press and hold the Power/Lock Key again.
4
Release all keys when the Factory hard reset screen is displayed.
5
Press the Power/Lock Key to continue or either of the Volume Keys to cancel.
6
Press the Power/Lock Key once more to confirm or either of the Volume Keys to
cancel.
WARNING
If you perform a Hard Reset, all user applications, user data and DRM licenses
will be deleted. Please remember to backup any important data before
performing a Hard Reset.

6. Opening and switching applications

Multi-tasking is easy with Android, you can keep more than one application running
at the same time. There is no need to quit an application before opening another one.
Use and switch between several open applications. Android manages each application,
stopping and starting them as needed to ensure that idle applications don't consume
resources unnecessarily.
16

Publicité

Table des Matières
loading

Table des Matières