Operating Remote Control - Napoleon Alluravision Serie Manuel D'installation Et D'opération

operation
EN
8.2

operating remote control

NEFL42 / 50 / 60 / 74 / 100CHD remote
Power
Blue Flame
Orange Flame
Yellow Flame
Heater
Flame Speed
Top Light
NEFL42/50/60/
74/100CHD only
26
W415-2212 / F / 04.23.19
Turns the appliance on/off.
Controls fl ame brightness.
Settings:
F0 - Flame off
F1 - Small fl ame
F2 - Medium fl ame
F3 - Bright fl ame
F4 - Brightest fl ame
Turns the heater and blower
on/off.
Settings:
H0 - Heater and blower off
BL - Blower on
H1 - Low heat
H2 - High heat
H3 - High heat with blower
boost
Controls the speed of the
fl ame. There are 5 fl ame speed
settings: 01 (slowest) 02, 03,
04, and 05 (fastest).
Same as ember bed color.
NEFL42 / 50 / 60 / 74CHS remote
Ember Bed Color
Ember Bed
Brightness
Timer
Temperature
Control
Controls ember bed light
settings.
Settings:
L0 - Ember bed light off
L1 - White
L2 - Blue
L3 - Green
L4 - Red
L5 - Yellow
L6 - Purple
L7 - Auto-cycle through white,
blue, green, red, yellow, and
purple. (NOTE: It will take 3
seconds to switch between
colours.)
L8 - Lock to desired color
Controls the brightness of the
ember bed light.
Settings:
B1 - Low
B2 - Medium
B3 - Bright
B4 - Brightest
There are 10 timer settings:
00, 0.5h, 1h, 2h, 3h, 4h, 5h,
6h, 7h, 8h.
There are 7 temperature
settings: 61ºF [16ºC], 64ºF
[18ºC], 70ºF [21ºC], 75ºF
[24ºC], 81ºF [27ºC], 85ºF
[29ºC], and OFF.