Operating Instructions - Klarstein WINDFLOWER Mode D'emploi

EN
16

OPERATING INSTRUCTIONS

Before using the fan, make sure that it is on a flat and stable surface. Damage may
occur if the fan is placed on an incline or decline.
1. Set the speed switches to the "0" position, and then insert the plug directly into a
standard AC socket-outlet. Be sure that the plug fits tightly into the socket-outlet.
2. Turn the speed switch on back motor cover to start the fan. "1" means low speed,
"2" means medium speed, "3" means high speed, "0" means close
1 low speed
2 medium speed
3 high speed
0 off
3. Press the oscillation switch on the top of motor cover, the fan will oscillate from left
to right automatically. Pull out the oscillation switch, it will stop to oscillate.