Charge Of The Battery - OCEAN DRIVE E-SCOOTER S9 Manuel D'utilisation

12. CHARGE OF THE BATTERY

- The e-scooter is equipped with a rechargeable Lithium-ion battery
and with a battery charger suitable for correct charge.
ONLY use the battery charges supplied as a standard to
charge the battery.
- Upon first use, it is advised to charge the battery completely (max-
imum charge time: 3-5 hours)
- Whenever it is necessary to charge the battery (the residual charge
level is indicated by the LEDs on the display (see paragraph "10"),
work as follows:
a• Open the kickstand (2) and position the e-scooter on a flat sur-
face.
b• Remove the cap from the charge socket of the battery (30).
c• Insert the jack (31) in the charge socket of the battery (30).
d• Connect the power cord (32) to the battery charger (33).
e• Insert the plug (34) of the battery charger (33) in the power
socket. The LED on the battery charger turns on in "red" indi-
cating that charge is in progress.
When charge is complete, the LED becomes "green".
When the battery charger is connected to the e-scooter,
all the electric functions and the motor are disabled to
avoid overheating or damages to the components.
EN - 12 00 - 12
30
30
31
100-240V~
50/60Hz
34
RED
33
Make sure that mains voltage corresponds to what is
indicated on the battery charger (100-240V~ 50/60Hz).
33
32
GREEN
33