Axis M11-E Serie Guide D'installation page 21

1
Bottom cover
2
Screw T20 (4x)
3
Wall mount
4
Bracket adjustment screw T30
12. For information about how to view the video stream, see Access the Product.
13. Adjust the focus and zoom, see page 22.
NO TICE TICE
NO NO TICE
Make sure not to pinch any cables when closing the housing.
14. Close the housing. Make sure to alternately tighten the bottom cover screws a few turns
at a time until they are tight (torque 1.5 Nm). This will help ensure that the bottom
cover gasket is compressed evenly.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
AXIS M11-E Network Camera Series
1
2
3
4
21