Standby Mode - Teac NS-X1 Manuel Du Propriétaire

Checking the sleep timer setting
You can check the remaining time of the sleep timer.
From the "Settings" menu, select "Sleep".
A l a r m
> S
l e e p
S t a n d b
The remaining time will be displayed, and the unit will automatically
enter standby after the displayed time.
If the Sleep mode is not set, "Sleep Off" will be displayed.
You can also check the sleep timer setting by pressing the SLEEP
o
button on the remote control.
Adjusting the sleep function
1
From the "Settings" menu, select "Sleep".
The remaining time will be displayed.
S l e e p
2
Press the UP or DOWN (5 or b) button to adjust the
time.
Press the UP ( 5) button to increase the remaining time.
o
(Example: If you press the button when the remaining time is
13, the remaining time is changed to 15.)
Press the DOWN ( b) button to decrease the remaining time.
o
(Example: If you press the button when the remaining time is
33, the remaining time is changed to 30.)
28
Settings (4)
y M o d e
1 3

Standby Mode

You can set the network to stay on/off during standby mode.
Setting the standby mode
1
From the "Settings" menu, select "Standby Mode".
A l a r m
S l e e p
> S
t a n d b
2
Select "On" or "Off".
On: Network connection will remain on in standby mode.
Off: Network connection will be off in standby mode.
y M o d e