Olympus CAMEDIA C-5060 Wide Zoom Mode D'emploi page 18

6
Press ac to select one of the following date formats: Y-
M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press d.
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7
Press ac to set the year, then press d to move to the
month setting.
• To move back to the previous setting, press b. The first two digits of
the year are fixed.
8
Repeat this procedure until the date and time are
completely set.
• The time is displayed in the 24-hour format.
For example, 2pm will be displayed as 14:00.
9
Press e.
En
• For a more accurate setting, press e when the time signal hits 00
seconds.
10
To turn the camera off, set the power switch to OFF.
• The date and time settings will be canceled if the camera is left
without the battery for approximately 5 days.
Note
18 En