Cleaning And Care; Product Registration - Backyard Grill GBC1562WD-C Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14
Operating Instructions (continued)
Turning Off
1.
Push grill light button to
(OFF) position (Figure 8).
2.
Disconnect battery box cord.
Note: battery cord should always be unplugged when not in use.
Replacing the batteries (See Assembly Step 25)
W WARNING: Do not mix old and new batteries
W WARNING: Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc.) batteries
1.
Remove battery box back cover.
2.
Replace AAA batteries (4).
3.
Replace battery box back cover.

Cleaning and Care

W CAUTION:
1. All cleaning and maintenance should be done when grill is cool
and with the fuel supply disconnected.
2. Do NOT clean any grill part in a self-cleaning oven. The extreme
heat will damage the finish.
3. Do NOT enlarge valve orifices or burner ports when cleaning the
valves or burners.
W CAUTION: Unplug rotisserie motor from the outlet when not in use and
before cleaning. Allow to cool before putting on or taking off parts.
Notices
1.
This grill should be thoroughly cleaned and inspected on a regular basis.
2.
Abrasive cleaners will damage this product.
3.
Never use oven cleaner to clean any part of grill.
Before Each Use:
1.
Keep the grill area clean and free from any
combustible materials, gasoline, and other
flammable vapors and liquids.
2.
Do NOT obstruct the flow of the combustion of LP
gas and the ventilation of air.
3.
Keep the ventilation opening(s) of the LP gas tank
area free and clear from debris.
4.
Visually check the burner flames to make sure
your grill is working properly (Figure 10).
5.
See below for proper cleaning instructions.
6.
Check for obstructions of airflow to the burners.
Spiders, insects and webs can clog the burner/
venturi tube. A clogged burner tube can lead to
a fire.
Cleaning Surfaces
1.
Wipe surfaces clean with mild dishwashing
detergent or baking soda mixed with water.
2.
For stubborn surfaces, use a citrus-based
degreaser and a nylon scrubbing brush.
3.
Rinse clean with water.
4.
Allow to air dry.
Cleaning Main Burners
1.
LP: Turn LP gas tank valve to "CLOSED."
NG: Turn natural gas main valve to "OFF."
2.
Turn all control knobs clockwise to the " OFF"
position.
Note: A "poof" sound is normal as the last of the
gas is burned.
3.
LP: Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
NG: Disconnect main gas line per "Disconnecting Natural Gas Line" section.
4.
Remove cooking grids and heat plates.
5.
Remove burners by removing the fasteners, which secure the burners to the grill bottom.
6.
Lift burners up and away from gas valve orifice.
7.
Disconnect wire from spark electrode.
8.
Clean venturi of each burner with small bottle brush or compressed air.
9.
Remove all food residue and dirt on burner surfaces.
10. Clean any clogged ports with a stiff wire (such as an opened paper clip).
11. Inspect burners for any damage (cracks or holes). If damage is found, replace with new
burner(s) from manufacturer.
12. Reinstall burners, checking to insure that gas valve orifice is correctly positioned inside
each burner venturi. Also, check position of spark electrode.
®
Figure 10
Burner Flame Conditions
Use this chart to see if your burners
need to be cleaned.
1-2 in. /
25.4 - 50.8 mm
Normal: Soft blue flames with yellow
tips between 1 in. - 2 in. height.
Needs cleaning: Noisy with hard
blue flames.
Has to be replaced: Wavy with
yellow flames.
Outdoor LP Gas Barbecue Grill
Model No. GBC1562WD-C
Cleaning and Care (continued)
13. Replace heat plate(s) and cooking grid(s).
14. LP: Connect LP gas tank per "Installing LP Gas Tank" section.
NG: Connect NG main line per "Installing Natural Gas Line" section.
15. Perform leak test per "Checking for Leaks" section.
Cleaning Side Burner
1.
LP: Turn LP gas tank valve to "CLOSED."
NG: Turn natural gas main valve to "OFF."
2.
Turn all control knobs clockwise to the " OFF" position.
Note: A "poof" sound is normal as the last of the gas is burned.
3.
LP: Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
NG: Disconnect main gas line per "Disconnecting Natural Gas Line" section.
4.
Remove side burner grid.
5.
Remove burner by removing the screws that secure the burner to the side shelf.
6.
Lift burner up and away from gas valve orifice.
7.
Clean venturi of burner with small bottle brush or compressed air.
8.
Remove all food residue and dirt on burner surface.
9.
Clean any clogged ports with a stiff wire (such as an opened paper clip).
10. Inspect burner for any damage (cracks or holes). If damage is found, replace with new
burner from manufacturer.
11. Reinstall burner, check to insure that gas valve orifice is correctly positioned inside burner/
venturi tube also check position of the spark electrode.
12. Replace cooking grid(s).
13. LP: Connect LP gas tank per "Installing LP Gas Tank" section.
NG: Connect NG main line per "Installing Natural Gas Line" section.
14. Perform leak test per "Checking for Leaks" section.
Before Storing
1.
LP: Turn LP gas tank valve to "CLOSED."
NG: Turn natural gas main valve to "OFF."
2.
Turn all control knobs clockwise to the " OFF" position.
Note: A "poof" sound is normal as the last of the gas is burned.
3.
LP: Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
NG: Disconnect main gas line per "Disconnecting Natural Gas Line" section.
4.
Clean all surfaces.
5.
Lightly coat the burner(s) and cooking grid(s) with cooking oil to prevent excess rusting.
6.
If storing the grill indoors, disconnect the LP tank per "Disconnecting LP Gas Tank" section.
7.
Place the protective cap cover on the LP tank and store the tank outdoors in a well-
ventilated area out of direct sunlight.
8.
If storing the grill indoors, cover the grill and store in a cool dry place.
9.
If storing the grill outdoors, cover the grill with a grill cover for protection from the weather.

Product Registration

For faster warranty service, register your product immediately at BlueRhino.com/warranty or by
calling 1.800.762.1142.
Replacement Parts
Replacement parts can be found at parts.BlueRhino.com or by calling 1.800.762.1142.

Publicité

Table des Matières
loading

Table des Matières