ZONE 5
ZONE 6
ZONE
raise/lower
buttons
LED Displays for Temporarily Changing Shade Settings
Scene Status/Control
Affected/Control unit
Unaffected/Control unit
Affected/Wallstation
Unaffected/Wallstation
Legend:
LED lit
LED off
R
TEMPORARY
LED
FADE
TEMPORARY
TEMPORARY
ZONES
M S
ZONES
MASTER
AC Shade Zones
Stopped
Raising
GRAFIK Eye
To temporarily adjust a Sivoia QED
shade zone:
1. Press the TEMPORARY ZONES button
so the TEMPORARY LED above the
TEMPORARY ZONES button lights .
2. Press the ZONE 5 or 6 button to adjust
any zone's shade position to a preset
position .
3. Use the raise/lower buttons on the
wallstation that controls the shade zone to
adjust it to a position that is not a preset .
To temporarily adjust an AC shade
zone:
1. If fully open, press the ZONE 6 button .
At the desired position, press the ZONE 6
button again to stop the AC shade .
2. If fully closed, press the ZONE 5 button .
At the desired position, press the ZONE 5
button again to stop the AC shade .
Sivoia QED Shade Zones
Lowering
Stopped
3000 Series Control Unit Installer's Guide
®
Raising
Lowering
1