Charcoal Embers (Bgd33 Only); Louvre Installation; Logo Placement - Napoleon Fireplaces GD33NR Mode D'emploi

6.5

CHARCOAL EMBERS (BGD33 ONLY)

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
6.6

LOUVRE INSTALLATION

A
B
C
6.7

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the glass viewing door,
as indicated.
CLIPS
CENTRE SLOT
A
HOOD
Attach the hood by
pressing the top fl ange
into the clips along the
top of the louvre open-
ing. Secure using a
screw through the centre
slot.
SLOT
TAB
B
UPPER LOUVRES
Insert the louvre tabs
into the slots located
at the top left and right
corners of the unit.
41
32.1
SLOT
HINGE CLIP
C
LOWER LOUVRES
Insert the hinge clips
into the slots located at
the bottom left and right
corners of the unit. To
remove the louvres, pull
the back tabs of the clips
forward, while pushing
the louvre assembly
back. Lift the clip.
57.3
½"
LOGO
½"
97.1
W415-0662 / D / 08.10.12