Elica LIB0098383 Guide D'utilisation, D'entretien Et D'installation page 13

11. Assemble the lower (narrow) trim strips to the lower vent
cover assembly.
Cut the upper (wide) trim strips to length to fit the upper
duct cover assembly.
Assemble the upper trim strips to the upper duct cover
assembly.
12. Install grease filter assembly.
13. Reinstall the panel.
14. Check all light bulbs to make sure they are secure in
their sockets.
Turn power on in service panel.
Check lights and blower operation per Care & Use
section of this manual.
If range hood does not operate:
• Check that the circuit breaker is not tripped or the house
fuse blown.
• Disconnect power supply. Check that wiring is correct.
To get the most efficient use from your new range hood,
read the "Use and Care Information" section.
Keep your Installation Instructions and Use and Care
Guide close to range hood for easy reference.
13