For Your Safety; Power Connection - Panasonic Homehawk Shelf Guide D'utilisation

• This product may be used in ways that violate
the privacy or publicity rights of others� You are
responsible for the ways in which this product is
used�
F
or your safety
To prevent severe injury and loss of life/property‚ read
this section carefully before using the product to ensure
proper and safe operation of your product�
WARNING

Power connection

• Use only the power source marked on the
product�
• Do not overload power outlets and extension
cords. This can result in the risk of fire or electric
shock�
• Completely insert the AC adaptor/power plug
into the power outlet� Failure to do so may cause
electric shock and/or excessive heat resulting in
a fire.
• Regularly remove any dust‚ etc� from the AC
adaptor/power plug by pulling it from the power
outlet‚ then wiping with a dry cloth� Accumulated
dust may cause an insulation defect from
moisture‚ etc. resulting in a fire.
• Unplug the product from power outlets if it emits
smoke‚ an abnormal smell‚ or makes an unusual
noise. These conditions can cause fire or electric
shock. Confirm that smoke has stopped emitting
8
HNC815C_ITG_(en_en)_0424_ver.040.pdf 8
and contact us by visiting our Support page:
www.panasonic.ca/english/support
• Unplug from power outlets and never touch the
inside of the product if its casing has been broken
open� Danger of electric shock exists�
• Never touch the plug with wet hands� Danger of
electric shock exists�
• Do not connect non-specified devices.
Operating safeguards
• Unplug the product from power outlets before
cleaning� Do not use liquid or aerosol cleaners�
• Do not disassemble the product�
• Never put metal objects inside the product. If
metal objects enter the product‚ turn off the
circuit breaker and contact an authorized service
centre�
• Keep small parts‚ such as microSD cards‚ out of
the reach of children� There is a risk of swallowing�
Medical
• Consult the manufacturer of any personal
medical devices‚ such as pacemakers or hearing
aids‚ to determine if they are adequately shielded
from external RF (radio frequency) energy�
Wireless LAN features operate between the
frequencies listed below‚ with a peak transmission
power of 100mw:
2�412 GHz – 2�462 GHz
5�180 GHz – 5�320 GHz
5�500 GHz – 5�600 GHz
2019/04/24 18:22:46