Installation; Preparation - Klarstein AURELIA COLETTE Mode D'emploi

EN
20

INSTALLATION

Preparation

Position the hanging plate on the ceiling and then mark the position of the screw holes.
Fasten the hanging plate using 1 1 or 8 screws, depending on the nature of your ceiling:
Wooden ceiling
Use 1 1 ST4 screws for wooden ceilings.
Installation
1
Concrete ceiling
Use 8 expansion bolts for
concrete ceilings.
Fasten the angle bars to the
hanging plate with the 8 screws
(M5). Extend the angle bars to the
desired height and fix the bars with
16 screws (M5), washers and nuts.
Important: The angle bars must
have an overlap of at least
100 mm.