Gas Component Connection Checks - RealFlame Treviso Square C11842LP Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GAS COMPONENT CONNECTION CHECKS

If the burner will not light or stay lit, please perform the following checks.
1.) Make sure the electrode wire is completely and correctly connected.
Back of
Electronic
Ignition
2.) Make sure that the igniter housing is unobstructed.
Clear any debris on top of the igniter housing and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
Do not cover
housing
Igniter
Housing
Burner
Tube
CORRECT
INCORRECT
16

Publicité

Table des Matières
loading

Table des Matières