Medion SIM 2060 Mode D'emploi page 172

1. Press the eject button at the optical drive to open the tray.
2. Pull the tray out completely with care.
3. Remove the disk from its case, without touching the un-
printed side if possible.
4. Place the disc on the tray so
that it lays flat with the label
facing upward and gently push
the tray in to close it. The disk
will now lie flat on the tray and
will engage onto the disk holder
audibly.
5. Test that the disk is able to turn
freely and then push the tray
back into the optical drive care-
fully.
The 'E' drive letter will have been allocated to your optical drive in
the delivery status. You will have easy access to your files on your
disks with Windows Explorer (workstation). Start Explorer through
the Start Menu or by pressing the Windows Button
Button at the same time
The pre-installed media reproduction will be used automatically
during access to DVD videos (or audio and video files on normal
data CDs).
6. Press the eject button if you want to remove a disk.
Warning!
While the notebook is accessing the optical drive the
media activity indicator is lit. Do not try to remove the
CD from the drive while this LED is lit.
42
The Optical Drive
and the 'E'