Cabling - Medion SIM 2060 Mode D'emploi

Cabling

• Arrange cables so no one can walk on or trip over them.
• Do not place objects on any of the cables.
• To avoid damage to your PC, connect your peripherals (e.g.,
keyboard, mouse and monitor) whilst your notebook is pow-
ered off. Some devices can be connected whilst your note-
book is in use. These devices usually have a USB or IEEE
1394 connector. Please follow the appropriate instruc-
tions for each device.
• Keep the notebook at least one meter (approximately three
feet) away from high frequency and magnetic interfer-
ence sources (e.g., televisions, loudspeaker cabinets, mo-
bile telephones, etc.) in order to avoid malfunctions and/or
loss of data.
• Please note that only shielded cables shorter than
3 metres (9.84 ft) should be used for the LPT, COM, USB,
IEEE 1394, audio, video and network interfaces with this
notebook. Please use only doubly screened cables in the
case of printer cables.
• Do not replace the cables supplied. Only use the cable sup-
plied with the notebook, since that cable will have been
tested extensively in our laboratory.
• Also only use the connection cables supplied with the de-
vices to connect your peripherals.
• Make sure that all connecting cables are connected with the
respective peripheral devices, in order to avoid perturbing
radiation. Remove any cables not needed.
• The connection of devices is limited to equipment that com-
plies with EN60950 "Safety of information technology
equipment" or EN60065 "Audio, video and similar electronic
apparatus. Safety requirements".
8
Safety Instructions