emerio ELVIS FN-111794 Mode D'emploi page 5

FN-111794 & FN-111794.1 & FN-111794.3
PARTS DESCRIPTION
1. Grid
2. Fan blade
3. Decoration grip
4. Motor
5. Oscillation button
6. On/off/speed switch
7. Base
8. Decoration hole
9. Head tilt knob
Note:
1. The decoration grip (3) located on the top of the motor is only for decoration. Do not use it as a handle to
lift the fan.
2. The decoration hole (8) is just a memory of the 50's design. Do not put fingers or any other things in it. Do
not use it to hang the fan to the wall.
OPERATING INSTRUCTIONS
1. No need to assemble, just take the fan out from the box and remove the packaging materials.
2. Place the fan on a flat, dry and stable surface. Make sure "On/off/speed switch" is in position "0".
3. Plug the power cord into a suitable socket.
4. Slide "On/off/speed switch" to select the desired speed. 0 = off; 1 = minimum speed, 2 = medium speed; 3
= maximum speed.
5. After use, slide "On/off/speed switch" to position "0", and unplug the power cord.
Note:
1. Oscillation: Push the oscillation button to activate the automatic left/right oscillation. Push the button again
to deactivate this function.
2. Adjust the head tilt angle: loosen the head tilt knob and adjust the head of the fan up or down according to
your need. Then tighten the knob to fix the position.
Always turn the fan off before adjust the head tilt angle.
CLEANING AND MAINTENANCE
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a soft and dry cloth. Always take out the mains plug first.
3. Do not disassemble the fan.
4. Do not use solvents or any other chemical products to clean the appliance.
5. Pack the appliance in its original box and place it in a dry, well-ventilated place when it is not to be used for
a long period of time.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50/60 Hz
Power consumption: 35W
- 4 -
EN