Erecting The Awning - Trigano AUVENT INDIANA Notice De Montage

ENGLISH
INDIANA awning fits POP up caravans, contact
your dealer to be sure that this awning can fit your
caravan.

ERECTING THE AWNING

1 - Once your caravan is correctly positioned,
carefully clean the ground whilst erecting the
awning in order to avoid any risk of damage.
The doors and windows of the caravan must
be closed.
2 - Place the awning beading on the awning close
to the caravan channel. Insert it in the channel
and slide it until the awning is in the correct
position.
3 - Take the pump and connect it to the inflation
valves.
4 - Begin inflation following the instructions given
in the section PUMP and INFLATION of this
booklet.
:
ATTENTION During the inflation process the pole
will need to be manually held to ensure it takes its
rounded form.
:
ATTENTION INFLATE EACH POLE TO: 0.344
BARS / 5 PSI. DO NOT INFLATE ABOVE THESE
VALUES AS THIS MAY RESULT IN THE POLES
BURSTING.
Notice INDIANA.indd 16
A
B
5 extra tubes
C
- 16 -
06/02/2018 14:51