Service And Repairs - Leister LE 3000 Instructions D'utilisation

Service and repairs

• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams and
spare parts lists.
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of gu-
arantee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by an invoice or a delivery document.
Heating elements shall be excluded from warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
Declaration of incorporation
(As defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that
the incomplete machine
Designation:
Type:
– insofar as is possible from the scope of supply – corresponds to the applicable fundamental requirements of the
EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We furthermore declare that the special technical documents pursuant to Annex VII (Part B) have been compiled
for this incomplete machine and that we are committed to communicate these electronically to the market
surveillance authorities upon justified request.
Name of the documentation officer: Volker Pohl, Manager Product Conformity
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in
which the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive
(2006/42).
Kaegiswil, 03.09.2018
Disposal
Electrical equipment, accessories, and packaging should be subjected to environmentally friendly
recycling. For EU countries only: Do not dispose of electrical equipment with household refuse!
Air heater
LE 3000; LE 5000
Electromagnetic Compatibility
2014/30
Low Voltage Directive
2014/35
RoHS Directive 2011/65
EN ISO 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 61000-3-12, EN 61000-3-11 (Z
Bruno von Wyl, CTO
), EN 62233, EN 60335-2-45, EN 50581
max
Christoph Baumgartner, GM
11