Inspecting And Replacing Anodes - Yamaha Motor VF150 Serie Manuel De L'utilisateur

Maintenance
6. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug to the specified torque.
Tightening torque:
7 Nm (0.71 kgf-m, 5.2 ft-lb)
7. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw to the specified torque.
Tightening torque:
7 Nm (0.71 kgf-m, 5.2 ft-lb)
EMU41137

Inspecting and replacing anodes

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00721
NOTICE
Do not paint anodes, as this would render
them ineffective.
TIP:
Consult a Yamaha dealer for inspecting and
replacement of internal anodes attached to
the engine.
90
VF150LA, VF175LA
ZMU08024
1
1. Anode
1
ZMU07785