Checking Power Trim And Tilt Unit - Yamaha Motor VF150 Serie Manuel De L'utilisateur

Operation
1
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
1
2
3
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5. Push the cowling lock levers inward to
secure the top cowling.
1
1. Cowling lock lever
54
2
3
ZMU07756
2
3
ZMU07757
ZMU07758
1
1. Cowling lock lever
6. Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02371]
EMU46180

Checking power trim and tilt unit

EWM04270
WARNING
 Never get under the lower unit while it is
tilted, even when the tilt support shaft is
installed or the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
 Body parts can be crushed between the
outboard motor and the clamp bracket
when the outboard motor is trimmed or
tilted.
1
ZMU07759
ZMU07760