Troubleshooting - Carl Roth CR-KP292 Mode D'emploi

Troubleshooting

7 Troubleshooting
During the warranty period, intervention in the Piston Pump and accessory components may
only be made by manufacturing firm.
Trouble
Pump does
not start
Pump does
not generate
a vacuum or
overpressure
Running
noise
Cable
14
Cause
No power supply
Motor defective
Connected apparatus
and/or
connecting elements
leaking
Pump leaking
Pump dirty
loose screws
loose screws
or connectors
defective and/or brittle
Remedy
by:
Qualified
Check electrical installation
electrician
Service
Exchange
workshop
Identify and seal the leak,
replace the seals and/or
hoses if necessary.
Exchange the hoses
and/or fittings if necessary.
User or
Service
workshop General maintenance /
Cleaning
Tighten the screws
Tighten the screws
and / or connectors
Qualified
Exchange of the cable
electrician
with: