Xiaomi G10 Manuel D'utilisation page 11

Care & Maintenance
Cleaning the HEPA Filter
Note: It is recommended to clean the HEPA filter once every 4
to 6 months.
1. Remove the dust compartment as shown in the figure.
2
1
Dust Compartment Release Switch
18
2. Remove the HEPA filter from the vacuum cleaner by pulling it
down in the direction shown in the figure.
3. Clean the HEPA filter with clean water. Make sure you rotate the
HEPA filter 360° to thoroughly remove all dust caught in the filter.
Lightly tap the filter several times to remove any excess dirt.
Notes:
Only use clean water to clean the filter. Do not use detergent.
Do not attempt to clean the HEPA filter with a brush or finger.
4. Allow the HEPA filter to thoroughly dry for at least 24 hours.
Installing the HEPA Filter
1. Insert the HEPA filter into the vacuum cleaner and gently press
down, as illustrated.
2. Reinstall the dust compartment.
1
Insert until it
2 clicks into place
19